Double-sided transparent polyester tape, thickness 0.15 mm, modified solvent acrylic adhesive, white siliconized paper liner. Good resistance to plastifiers and UV rays.
Suitable for general applications on paper, metal and plastic. Indicato per superfici di difficile applicazione.
• height 1250 mm
• length 800 m
• 3" cardboard core
• height 1250 mm
• length from 25 to 200 m
• 3" cardboard core
• variable cutting-roll from 4 to 1250 mm
• length from 25 to 150 m
• 3" cardboard core
| Thickness | 150 µm (0.15 mm) |
| Protective liner | white siliconized paper 110 g/m² |
| Carrier | polyester |
| Adhesive | Modified solvent acrylic |
| Available widths | from 4 to 1250 mm |
| Available lengths | up to 800 m |
| Product type | Double-sided adhesive tape |
| Adhesion to steel (PSTC1) | 18 +/- 2 N/25 mm |
| Static Shear | ≥ 170 hours |
| Rolling ball tack | < 10 cm |
| Temperature resistance | -30° +150°C |
| Application temperature | between 18°C & 35°C |
| Shelf life | 12 months |
The above characteristics are based on results obtained from rigorous testing and calculation. However, although perfectly reliable, they are not guaranteed and the user must check the suitability of the product by consulting us if there is any doubt about particular applications. The product should be stored in a dry, well ventilated area at a temperature of approximately 20°C and should be protected from continuous exposure to sunlight. Apply on well dried and clean surfaces.
Download product data sheet
